Makita LS0714 Instruction Manual
Also see for LS0714: Instruction manualInstruction manualInstruction manualParts BreakdownInstruction manual
                                                                                                                |
11 ENGLISHENGLISH (Original instructions)SPECIFICATIONSModel LS0714 LS0714F LS0714FL LS0714LBlade diameter 190 mmHole (arbor) diameter(country specific)20 mm or 15.88 mmMax. kerf thickness ofthe saw blade2.2 mmMax. Miter angle Left 47° , Right 57°Max. Bevel angle Left 45°, Right 5°No load speed (min -1 ) 6,400 min -1Laser Type - Red Laser 650 nm, < 1mW ( Laser Class 2 )Dimensions (L x W x H) 670 mm x 430 mm x 458 mmNet weight 12.5 - 14.2 kg 12.8 - 14.5 kg 12.9 - 14.6 kg 13.0 - 14.8 kg• Due to our continuing program of research and development, the specifications herein are subject to changewithout notice.• Specifications may differ from country to country.• The weight may differ depending on the attachment(s). The lightest and heaviest combination, according toEPTA-Procedure 01/2014, are shown in the table.Max. Cutting capacities (H x W) with blade 190 mm in diameter.Miter angle Bevel angle45° (left) 0° 5° (right)0° * 45 mm x 265 mm Note1 * 60 mm x 265 mm Note 1 -----40 mm x 300 mm 52 mm x 300 mm 40 mm x 300 mm45° (left and right) * 45 mm x 185 mm Note2 * 60 mm x 185 mm Note 2 -----40 mm x 212 mm 52 mm x 212 mm57° (right) ----- * 60 mm x 145 mm Note 3 -----52 mm x 163 mm(Note)* mark indicates that a wood facing with the following thickness is used.1: When using a wood facing 20 mm thick.2: When using a wood facing 15 mm thick.3: When using a wood facing 10 mm thick.SymbolsThe following show the symbols used for the equip-ment. Be sure that you understand their meaning beforeuse.Read instruction manual.DOUBLE INSULATIONTo avoid injury from flying debris, keepholding the saw head down, after makingcuts, until the blade has come to a com-plete stop.When performing slide cut, first pull car-riage fully and press down handle, thenpush carriage toward the guide fence.Do not place hand or fingers close to theblade.For your safety, remove the chips, smallpieces, etc. from the table top beforeoperation.Always set SUB-FENCE to left positionwhen performing left bevel cuts. Failure todo so may cause serious injury to operator.To loosen the bolt, turn it clockwise.Never look into the laser beam. Direct laserbeam may injure your eyes.Only for EU countriesDo not dispose of electric equipmenttogether with household waste material!In observance of the European Directive,on Waste Electric and ElectronicEquipment and its implementation inaccordance with national law, electricequipment that have reached the end oftheir life must be collected separately andreturned to an environmentally compatiblerecycling facility. |
Related manuals for Makita LS0714
Makita LS0714 Instruction Manual
Makita LS0714 Instruction Manual
Makita LS0714 Instruction Manual
Makita LS0714 Instruction Manual
Makita LS0714 Instruction Manual
Makita LS0714 Instruction Manual
Makita LS0714 Instruction Manual
Makita LS0714 Instruction Manual
Makita LS0714 Instruction Manual
Makita LS0714 Instruction Manual
manualsdatabase
Your AI-powered manual search engine