Makita PTM0900 Operator's Manual

For storage and transport purposes, some components of the machine are notinstalled in the factory and have to be assembled after unpacking. Follow the instruc-tions below.The machine is supplied without engine oil or fuel. Before startingthe engine, fill with oil and fuel following the instructions given in the engine manual.3.1 UNPACKINGWhen unpacking the machine, take care to gather all individual parts and fittings, anddo not damage the cutting deck when taking the machine off the pallet.The packaging contains:– the machine;– the steering wheel;– the seat;– the front bumper (if provided);– the battery;– the grass-catcher (with instructions);– an envelope containing:– the instruction manuals and documents,– nuts and bolts including a pin for locking the steering wheel,– starter keys and a spare 10A fuse.To prevent damage to the cutting deck, raise it to its maximumheight and take utmost care when taking the machine off the pallet.On hydrostatic drive models: to make it easier to move or take the machine offthe pallet, put the transmission disengagement lever in position «B» (☛ 4.33).3.2 FITTING THE STEERING WHEELPut the machine on a flat surface andstraighten up the front wheels.Fit the steering wheel (1) onto the protrudingshaft (2) with the spokes directed towardsthe seat.Line up the hole on the steering wheel hub➤NOTEIMPORTANTUNPACKING AND ASSEMBLY 9EN3. UNPACKING AND ASSEMBLY132