Makita XAD03 Instruction Manual

Also see for XAD03: Instruction manual

2 ENGLISHENGLISH (Original instructions)SPECIFICATIONSModel: XAD03Gear speed High LowDrilling capacities Steel 13 mm (1/2″)Wood Auger bit: 50 mm (2″)Self-feed bit: 65 mm (2-9/16″)Hole saw: 105 mm (4-1/8″)Auger bit: 50 mm (2″)Self-feed bit: 118 mm (4-5/8″)Hole saw: 159 mm (6-1/4″)No load speed (RPM) 0 - 1400 /min 0 - 350 /minOverall length*With the front handle extended538 mm (21-1/4″)* 608 mm (24″)Rated voltage D.C. 36 VNet weight 5.7 - 6.4 kg (12.6 - 14.0 lbs)• Due to our continuing program of research and development, the specifications herein are subject to change without notice.• Specifications may differ from country to country.• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-est combination, according to EPTA-Procedure 01/2014, are shown in the table.Applicable battery cartridgeBL1815N / BL1820B / BL1830 / BL1830B / BL1840B / BL1850B / BL1860B• Some of the battery cartridges listed above may not be available depending on your region of residence.WARNING: Only use the battery cartridges listed above. Use of any other battery cartridges may causeinjury and/or fire.SAFETY WARNINGSGeneral power tool safety warningsWARNING: Read all safety warnings, instruc-tions, illustrations and specifications provided with thispower tool. Failure to follow all instructions listed belowmay result in electric shock, fire and/or serious injury.Save all warnings and instruc-tions for future reference.The term "power tool" in the warnings refers to yourmains-operated (corded) power tool or BATTERY-operated (cordless) power tool.Work area safety1. Keep work area clean and well lit. Cluttered ordark areas invite accidents.2. Do not operate power tools in explosive atmo-spheres, such as in the presence of flammableliquids, gases or dust. Power tools create sparkswhich may ignite the dust or fumes.3. Keep children and bystanders away while operating apower tool. Distractions can cause you to lose control.Electrical Safety1. Power tool plugs must match the outlet. Nevermodify the plug in any way. Do not use anyadapter plugs with earthed (grounded) powertools. Unmodified plugs and matching outlets willreduce risk of electric shock.2. Avoid body contact with earthed or groundedsurfaces, such as pipes, radiators, ranges andrefrigerators. There is an increased risk of elec-tric shock if your body is earthed or grounded.3. Do not expose power tools to rain or wet con-ditions. Water entering a power tool will increasethe risk of electric shock.4. Do not abuse the cord. Never use the cord forcarrying, pulling or unplugging the power tool.Keep cord away from heat, oil, sharp edgesor moving parts. Damaged or entangled cordsincrease the risk of electric shock.5. When operating a power tool outdoors, use anextension cord suitable for outdoor use. Use ofa cord suitable for outdoor use reduces the risk ofelectric shock.6. If operating a power tool in a damp location isunavoidable, use a ground fault circuit inter-rupter (GFCI) protected supply. Use of a GFCIreduces the risk of electric shock.7. Power tools can produce electromagnetic fields(EMF) that are not harmful to the user. However,users of pacemakers and other similar medicaldevices should contact the maker of their device and/or doctor for advice before operating this power tool.Personal Safety1. Stay alert, watch what you are doing and usecommon sense when operating a power tool.Do not use a power tool while you are tired orunder the influence of drugs, alcohol or med-ication. A moment of inattention while operatingpower tools may result in serious personal injury.