10-138 BIOS SetupKeyboard ShortcutsFunction Keystroke NotesEnter SETUP DEL 1Load AMIBIOS “failsafe” CMOS SETUP values ENDDisplay extra AMIBIOS information at boot INS 8Switch between AMIBIOS “Silent Boot” graphical logoand standard text boot screenTAB 2, 6Boot from Network Device F12 1, 2Enter SETUP after system error F1 1Load CMOS SETUP defaults after system error F2 1Initiate BIOS RECOVERY & clear CMOS CTRL-HOME 7, 8Initiate BIOS RECOVERY, clear CMOS & NVRAM CTRL-PGUP 7, 8Initiate BIOS RECOVERY, preserve CMOS & NVRAM CTRL-PGDN 7PopUp Boot Menu F8 or F11* 1, 2, 3Enter SETUP (for serial console redirection) F4 1, 2, 3, 4PopUp Boot Menu (for serial console redirection) F3 1, 2, 3, 4Activate AMIKey Recovery Boot Services F9 1, 2, 5Notes:1. This keystroke can be configured to be a different value, based on the systemmanufacturer's specification. The keystroke listed here is the "default" setting inAMIBIOS8.2. This feature is not enabled in all AMIBIOS products.3. The assigned keystroke & a short description of its function is typically displayed bythe BIOS on system startup.4. These keystrokes are only available when using the AMIBIOS "serial consoleredirection", which allows access to the BIOS boot screen via a VT-100/ANSIterminal connected to a serial port.5. This feature is only available if AMIKey Recovery Boot Services are installed on thesystem drive and the BIOS is configured to use these services.6. AMIBIOS will automatically switch from the "Silent Boot" logo to the standard BIOStext screen if an error occurs that requires user attention. Some error messages aredisplayed over the "Silent Boot" logo, depending on system configuration.
