Product Overview 1-9Connectivity• 12 USB ports total:• 4 PC USB (5V)• 2 powered USB (12V)• 1 powered USB (24V printer)• 5 dedicated USB ports (reserved)Note: For security purposes individual USB ports can be disabled in the BIOS at:Chipset >> PCH-IO Configuration >> USB Configuration >>USB Ports Per-Port Disable Control >> Enabled.• 5 RS-232 ports (selectable power 0/5/12V)• 10/100/1000 MB (Gigabit) Ethernet LAN• VGA Port (dual independent display support)• Audio ports:• Rear channel line out• Line in (mic)• Integrated USB wireless option• Dual Cash Drawer Support• Single Connector for Backwards Compatibility• Connected through a cash drawer Kickout connector on the I/O Board orthrough the cash drawer Kickout connector on the transaction printer.• The terminal can be configured with 0, 1, or 2 cash drawers. The first drawer isattached to the terminal through a cable with an RJ-45 connector. A seconddrawer can be connected using a 'Y' cable.Note: A single Open/Close status signal is shared with both drawers. Therefore, it isnot possible to determine which cash drawer is open.Note: The terminal has a protection diode on board to limit back EMF from thesolenoid when the solenoid turns off. Third party cash drawers should also have adiode installed across the solenoid to further reduce potentially damaging overshootfrom the solenoid. This diode is present on all NCR cash drawers.
