Using This Guide xiiiShock Related Notices! WARNINGDo not insert a wire or metal objects into a vent or disk drive slot. There is a riskof an electric shock.Do not let water or foreign objects (e.g., pins or paper clips) enter the equipment.There is a risk of a fire, electric shock, and breakdown. When such objectsaccidentally enter the equipment, immediately turn off the power and unplug thecord. Contact your sales agent instead of trying to disassemble it yourself.Do not plug/unplug a power cord with a wet hand. There is a risk of an electricshock.Make sure to power off the server and unplug the power cord from a power outletbefore installing/removing any optional internal device orconnecting/disconnecting any interface cable to/from the server. If the server ispowered off, but its power cord is plugged to a power source, touching an internaldevice, cable, or connector may cause an electric shock or a fire.Unless described herein, never attempt to disassemble, repair, or alter theequipment. There is a risk of an electric shock or fire as well as malfunction.You may want to unplug the equipment if a thunderstorm is eminent. Do NOTtouch the equipment and cables during a thunderstorm in your area. There is arisk of a fire or electric shock.Make sure to power off the server and disconnect the power plug from a poweroutlet before cleaning or installing/removing internal optional devices. Touchingany internal device of the server with its power cord connected to a power sourcemay cause an electric shock even of the server is off-powered.
