Configuring Your System 3-19Selectable Boot Settings SubmenuFeature Choices or Display Only Description Your SettingSelectable SCSIBootEnabledDisabledSpecify whether the boot from theSCSI device can be selected ornot selected.SCSI Bus 01Select the bus to which the startedSCSI device is connected.SCSI Boot ID 0, 1, 2, 3, 4, 5, 6, 7, 8, 9,10, 11, 12, 13, 14, 15Set the SCSI ID of the startedSCSI device.SCSI Boot LUN 0, 1, 2, 3, 4, 5, 6, 7, 8, 9,10, 11, 12, 13, 14, 15Select the number of the LUN towhich the started SCSI device isbound.Restore Default Settings SubmenuWhen "Restore Default Settings" is selected the screen for returning the settingvalues to the default values is displayed.Note: After restoring the default settings you must setthe SCSI ID for SCSI Bus 1 to the value 6. Also, under the"Host Adapter Settings Submenu" the >4Gbyte Addressingmust be set to "Enabled".Raw NVRAM Data SubmenuWhen "Raw NVRAM Data" is selected the information on NVRAM installed inthe host adapter is displayed in hexadecimal format and can not be edited. Thisfunction is only provided to solve problems.Scan SCSI BusWhen "Scan SCSI Bus" is selected in the "Fast!Util Options Menu" the list ofdevices connected to each SCSI bus is displayed in the order of SCSI IDs. Theinformation to be displayed includes the vendor (device manufacturer), productname, and firmware revision.
