5-32 Problem SolvingTable 5-3. POST Error Codes and Messages (continued)Error Code and Message Description Action0C00 Rompilot reports error numberxx• Configuration error inSETUP.• CPU/PCI module board isfaulty.• Re-configure Rompilot.• Replace the CPU/PCI moduleboard.8600 No working DQS value found • DIMM is faulty• DIMM is not supported• Replace DIMM• Replace DIMM withappropriate one.8610 MAC Address update failed –CoreI/O#010/100Mbit Ethernet COntrollerFRB2 timeout occurredwhen setting MAC address,and rewrite wasunsuccessful.• Replace the back panel board.• Replace the PCI moduleboard.8611 MAC Address update failed – CoreI/O#0Gbit Ethernet COntrollerFRB2 timeout occurredwhen setting MAC address,and rewrite wasunsuccessful.• Replace the back panel board.• Replace the PCI moduleboard.8612 MAC Address update failed –CoreI/O#110/100 Mbit Ethernet ControllerFRB2 timeout occurredwhen setting MAC address,and rewrite wasunsuccessful.• Replace the back panel board.• Replace the PCI moduleboard.8613 MAC Address update failed – CoreI/O#1Gbit Ethernet ControllerFRB2 timeout occurredwhen setting MAC address,and rewrite wasunsuccessful.• Replace the back panel board.• Replace the PCI moduleboard.
