Configuring Your System 3-17SCSI Device Settings SubmenuFeature Choices or Display Only Description Your SettingDisconnects OK YesNoSpecify whether thedisconnection of SCSI devicesfrom the SCSI bus is enabledor disabled.Check Parity YesNoSpecify whether the paritycheck is provided or is notprovided.Enable LUNs YesNoSpecify whether more than oneLUN number are given to SCSIID.Enable PPR YesNoFactory set. Do not change.Enable Device YesNoFactory set. Do not change.Negotiate Wide YesNoSpecify whether the wide (32bits) transfer is enabled ordisabled.NegotiateSynchronous YesNoSpecify whether thesynchronous transfer isenabled or disabled.Tagged Queuing YesNoFactory set. Do not change.Sync Offset 00, 02, 04, 06, 08, 10, 12, 14,16, 18, 20, 22, 24Select the proper offset value insynchronous transfer.Transfer Rate(Mbytes/sec)9 160 (Ultra3 SCSI)10 80 (LVD SCSI)12 40 (Ultra SCSI)25 20 (Fast SCSI)Sync Period40 12.5Select the proper speed insynchronous transfer.Exec Throttle 1, 4, 8, 16, 32, 64, 128, 255 Factory set. Do not change.
