3-16 Configuring Your SystemAdaptec SCSI Utility Configuration SettingsThe following keys are active for all Adaptec SCSI Utility screens:Key ActionArrows Up and down arrows move from one parameter to another within a screen.ENTER Displays options for a configurable parameter. Selects an option.ESC Moves back to previous screen or parameter or EXIT if at the Main menu.F5 Switches between color and monochrome.F6 Resets to host adapter defaults.The following table shows the normal settings for the Adaptec SCSI Utility andprovides a place for you to record any changes you make to these settings.Table 3-1. Adaptec SCSI Utility Setup ConfigurationsOPTIONRECOMMENDED SETTINGOR DISPLAY ONLYYOURCONFIGURATIONSCSI Bus Interface DefinitionsHost Adapter SCSI ID 7SCSI Parity Checking EnabledHost Adapter SCSI Termination EnabledAdditional OptionsBoot Device Options Press ENTER for menuBoot Channel A FirstBoot SCSI ID 0Boot LUN Number 0SCSI Device Configuration Press ENTER for menuSync Transfer Rate (MB/Sec) 160Initiate Wide Negotiation YesEnable Disconnection YesSend Start Unit Command YesEnable Write Back Cache N/CBIOS Multiple LUN Support No 1Include in BIOS Scan Yes 1Advanced Configuration Options Press ENTER for menu.Plug and Play SCAM Support DisabledReset SCSI Bus at IC Initialization Enabled1 No effect if BIOS is disabled.
