Troubleshooting 6-5If you have a computer that runs Windows Server 2003 or Windows 2000/XP/NT.You can also create a “Windows Server 2003 OEM-DISK for NEC EXPRESSBUILDER” by the stepsbelow:1. Prepare a 3.5-inch floppy disk.2. Insert the NEC EXPRESSBUILDER CD-ROM into the drive of a computer that runs WindowsServer 2003 or Windows 2000/XP/NT.3. From [Setup], select [Make OEM-Disk].4. Follow the instructions on the screen to insert the floppy disk.“Windows Server 2003 OEM-DISK for NEC EXPRESSBUILDER” will be created on the floppydisk. Write-protect and place a label on the disk and keep it in a safe place.Starting up Recovery ConsoleYou can start up Recovery Console in two ways: Start up Recovery Console installed on the system. Start up Recovery Console from the Windows Server 2003 CD-ROM. Installing Recovery Console on the system1. Start up the NEC Express5800/ft series and log on to Windows Server 2003.2. Insert the Windows Server 2003 CD-ROM into the drive.3. From [Start] of the taskbar, select [Run...] to run.CD-ROM drive:\i386\winnt32.exe /cmdcons /syspart:c: /tempdrive:c:4. Follow the messages that appear on the screen to continue. Starting up the Recovery Console1. Disable the configuration for boot monitoring function.Select [Server] - [Monitoring Configuration] - [Boot Monitoring] and choose “Disabled.”See “Step 3: Disable Boot Monitoring Function” (page 4-9) for details.2. Power on the system.(a) Select Microsoft Windows Recovery Console in “Please select the operating system tostart:”Please select the operating system to start:Windows Server 2003, EnterpriseMicrosoft Windows Recovery Console
