Windows Setup 4-5Size of the Partition to be CreatedThe required minimum size of a partition to install the system can be obtained from the followingformula:Size required for installation + paging file size + dump file sizeSize required for installation = 3,500MB (Windows Server 2003 R2)Paging file size (recommended) = size of memory mounted* u 1.5Dump file size = size of memory mounted* + 12MBIMPORTANT: The above paging file size is necessary for collecting debug information (memorydump). If a value smaller than the “Recommended” value is set for the initial size ofthe paging file, correct debug information (memory dump) may not be collected. The maximum paging file size is 4095MB in a partition. If 1.5 times the size ofmounted memory is larger than 4095MB, set the size at 4095MB. If the size of mounted memory is larger than 2GB, the maximum size of dump file is“2048MB+12MB.”TIPS: The mounted memory size means the total of memory installed on a single CPU/IOmodule.For example, if memory of 1GB is mounted, the required minimum partition size obtained from theabove formula is as follows:3500MB + (1024MB u 1.5) + (1024MB +12MB) = 6072MBTIPS: The minimum partition size you can specify in the Express Setup is 6072MB. Thepartition size must be 6072MB or larger for automatic installation. Therefore the sizesmaller than 6072MB cannot be specified.
