2 - 54 Memory Blocks______________________________________________________________________________________________________________________________________________________________________Document Revison 1 Elite IPK1-1-49 Networking Trunk Group/RouteAdvance AssignmentGeneral DescriptionUse this Memory Block to assign the function number of the Trunk Group to be used tonetwork an Electra Elite 48/192 system to another system by Tie lines or CO/PBX/CTX lines.Display Notes Programming Procedures1 Go off-line.2 Press LK1 + LK1 + DI to access the Memory Block.3 Use dial pad to enter the Function Number for Closed Number Block 01 of the TrunkGroup or the Route Advance Block. Use the following to enter data:J to move the cursor leftL to move the cursor rightK~Ito enter numeric dataH to clear all dataDefault ValuesNot Specified4 Press G to write selected data and display the next Closed Number Block.5 Repeat Steps 3 and 4 for each Closed Number Block. After data for the last Closed Number Block is written, the next MemoryBlock is displayed.6 Program the next Memory Block or press E to go back on-line.Related ProgrammingM.B. Number Memory Block Name1-1-30 Route Advance Block Assignment1-1-50 CO/PBX Outgoing Digit Add Assignment3-03 Trunk-to-Trunk Group AssignmentFunction Number 101~132 (Trunk Group 1~32, respectively) or 201~232 (Route Advance Block 1~32,respectively) is assigned to Closed Number blocks.System Mode1Submode1Data No.49PC Programming¦+BCSDataNo.4 9 : 0 1 = R TT I M E D I S P L A YClosedNumberBlock01~16FunctionNo.
