2 - 2 Memory Blocks______________________________________________________________________________________________________________________________________________________________________Document Revison 1 Elite IPK1-1-00 Pause Time SelectionGeneral DescriptionUse this Memory Block to specify the time of the pause that can be inserted betweendigits dialed on CO/PBX and Tie lines.DisplaySettings Notes LK 1 LK 2 LK 3 LK 4 LK 5 LK 6 LK 7 LK 8 The shadedselection is thedefault.1.0s 3.0sProgramming Procedures1 Go off-line.2 Press LK1 + LK1 + KK to access the Memory Block.3 Press the corresponding CO/PBX line key to change the data option.4 Press G to write the data and display the next Memory Block.5 Program the next Memory Block or press E to go back on-line.Related ProgrammingM.B. Number Memory Block Name1-1-09 Manual Pause Selection1-1-24 PBX/CTX Access Code Assignment I1-1-25 PBX/CTX Access Code Assignment II3-91 Trunk Type Selection1. A pause is automatically inserted following a CO/PBX Access Code (e.g., 9) by programming CO/PBX lines asPBX in Memory Block 3-91 (Trunk Type Selection) and 1-1-24/25 (PBX/CTX Access Code Assignment I/II).2. Manual pauses can be stored for use when dialing outside lines by the Last Number Redial or Save/Store andRepeat features using Memory Block 1-1-09 (Manual Pause Selection).3. Pauses can be stored as part of System and Station Speed Dial buffers when needed.System Mode1Submode1Data No.00PC Programming¦+BCM0 0 : P A U S E 3 . 0 sT I M E D I S P L A YTitleDataSettingDataNo.
