Setting Up the System 2-15230115orABA. Voltage selector switch set to 115 VACB. Voltage selector switch set to 230 VACFigure 2-8. Setting the Line VoltageConnecting the Power CordPlug the female end of the AC power cord into the input receptacle on the rearof the power supply cage. Plug the male end of the power cord intoNEMA 5-15R outlet for 100-120 VAC or NEMA 6-15R outlet for 200-240VAC.If the power cord supplied with the system is not compatible with the AC walloutlet in your region, obtain a suitable power cord that meets the followingcriteria.! The power cord must be rated for the available AC voltage and have acurrent rating that is at least 125% of the current rating of the system.! The power cord connector that plugs into the wall outlet must beterminated in a grounding-type male plug designed for use in your region.It must have certification marks showing certification by an agencyacceptable in your region.! The power cord connector that plugs into the system must be anIEC- type CEE-22 female connector.! The power cord must be less than 1.8 meters (6.0 feet) long.
