3-14 Configuring Your SystemConsole Redirection SubmenuFeatureChoices orDisplay Only Description Your SettingSerial Port Address DisabledSerial Port 2(3F8h/IRQ4)Serial Port 2(2F8h/IRQ3)If enabled, the console will beredirected to this port.If console redirection isenabled, this address mustmatch the settings of serialport 2.Baud Rate 57.6K19.2KEnables the specified baudrate.Flow Control No Flow ControlXON/OFFEnables flow control.ConsoleConnectionDirectVia ModemIndicate whether the console isconnected directly to thesystem or a modem is used toconnect.Boot MenuUse the up or down arrow keys to select a device, then press the <+> or <->keys to move the device higher or lower in the boot priority list.Boot Device Priority MenuBoot Priority Device Description Your Setting1. ATAPI CD-ROMDriveAttempts to boot from anATAPI CD-ROM drive.2. Diskette Drive Attempts to boot from adiskette drive.3. Hard Drive Attempts to boot from a harddrive device.4. Intel UNDI, PXE-2.0 (Build 071)Attempts to boot fromdiagnostic boot partition of theflash memory.
