Configuring Your Server 4-7Processor SettingsOption Parameter Description Your SettingProcessor Retest [No]YesIf yes, BIOS will clear historicalprocessor status and retest theprocessor on the next boot.Processor Speed nnn GHz Displays clock speed for theprocessor. (View only)Processor 1 CPUID NumeralDisabledDisplays CPU ID for processor, ifpresent."Disabled" indicates that theprocessor is defected. (View only)Processor 1 L2 Cache nnn KB Displays L2 cache size forprocessor.Processor 2 CPUID NumeralDisabledDisplays CPU ID for processor, ifpresent."Disabled" indicates that theprocessor is defected. (View only)Processor 2 L2 Cache nnn KB Displays L2 cache size forprocessor.Hyper-ThreadingTechnology[Enabled]DisabledDisable or enable the Hyper-Threading Technology.[ ]: Factory-setAdvancedOption Parameter Description Your SettingMemory Configuration – Displays Memory Configurationsubmenu.PCI Configuration – Displays PCI Configurationsubmenu.Peripheral Configuration – Displays Peripheral Configurationsubmenu.Advanced Chipset Control – Displays Advanced Chipset Controlsubmenu.Boot-time DiagnosticScreen[Enabled]DisabledIf enabled, the BIOS will display theNEC logo during POST. Press Escto switch to the POST executionscreen.Reset Configuration Data [No]YesSelect "Yes" if you want to clear thesystem configuration data during thenext boot. Automatically reset to"No" in the next boot.NumLock [Auto]OnOffSets power on Numlock state.Memory/Processor Error [Boot]HaltIf "Halt" is selected, the boot isstopped when POST error occurs.SATA RAID Enable [Disabled]EnabledIf enabled, the BIOS uses the harddisk drives connected to the onboardSATA connectors as the RAID drive.[ ]: Factory-set
