4-12 Configuring Your ServerSecurityThe Security menu appears if you move the cursor to the position of "Security."Press Enter on "Set Supervisor Password" or "Set User Password," to display the following screen.Enter the passwords on the dialog box. Passwords may have up to eight characters includingalphanumerics and symbols.IMPORTANT: User password can be set only when Administrator password isalready set. Set the passwords only after OS is installed.See the table below for the items.Option Parameter Description Your SettingUser Password Is ClearSetStatus only, user cannot modify.Once set, this can be disabled bysetting it to a null string, or by clearingpassword jumper on system board(see Configuring Mother BoardJumpers in this Chapter).SupervisorPassword IsClearSetStatus only, user cannot modify.Once set, this can be disabled bysetting it to a null string, or by clearingpassword jumper on system board(see Configuring Mother BoardJumpers in this Chapter).Set UserPasswordUp to eightalphanumericsSupervisor password controls accessto the setup utility.When Enter is pressed, the user isprompted for a password; press Escto abort. Once set, this can bedisabled by setting it to a null string, orby clearing password jumper onsystem board (refer to ConfiguringMother Board Jumpers in thischapter).
