General Description 2-27NEC EXPRESSBUILDERThe CD-ROM that comes with the server contains a setup utility called "NECEXPRESSBUILDER." When you have first installed the server or append features to the server,use the NEC EXPRESSBUILDER to set up your server.Refer to Chapter 6 for details.IMPORTANT: Do not use the NEC EXPRESSBUILDER for anyother computers than the server, nor other NEC Express5800 seriesservers than the one that NEC EXPRESSBUILDER is provided for.Not following this instruction may cause failures.The major functions of the NEC EXPRESSBUILDER are: To install the OS.It installs an operating system. To diagnose the system.It diagnoses the server. To create a support disk.It copies utilities in the NEC EXPRESSBUILDER CD-ROM into a floppy disk to launchthem from the floppy disk. To update the BIOS and firmwareIt updates the BIOS features and firmware program of the server. To update the Windows System*It updates the several resources of Microsoft Windows Server 2003, Microsoft Windows2000. To install the utilitiesIt install the management utilities of NEC ESMPRO and NEC DianaScope. To read the online documents*It opens the online document files (".pdf" files).* These functions are available under Windows system.NOTE: Some features among those listed above can be used from theremote computer via cross cable, modem, or LAN (consoleless feature).See Chapter 6 for details.
