A-2 Technical SpecificationsThis appendix provides the technical specifications for your server unit.Server UnitTable A-1 lists the server unit technical specifications.Table A-1. Server Unit Technical SpecificationsItem SpecificationChassisDimensions Tower-Based System:Width: 14.0 inches (350 mm)Height: 21.0 inches (525 mm)Depth: 27.8 inches (694 mm)Rack-Mount System:Width: 19.3 inches (483 mm)Height: 14.0 inches (350 mm)Depth: 27.8 inches (694 mm)Weight Maximum 114 lbs. (52 kg)Enclosure Tower or 19-inch rack mountable (8U)Environment Temperature: 50∞ to 95∞F (10∞ to 35∞C)Internal rack ambient temperature should not exceed 25∞CRelative humidity: 20% to 80% (no condensation)Peripheral Interface (rear access)Peripheral interface (front access)Two USB (4-pin) port connectors for keyboard and mouseTwo serial (9-pin) port connectorsSVGA (15-pin) port connectorRJ-45 T/10Base-T/100Base Ethernet port connectorOption PCI Slots per I/O Module Four 32-bit/33 MHz PCI bus slots(Slot 1 is reserved for graphics card or SMM card)Storage Device Capacity One IDE 24X CD-ROM driveOne 3 1/2-inch IDE high-capacity (120 MB) super (floppy) disk driveOne standard SCSI hard disk drive bay for mounting up to six hot-pluggable 3 1/2-inch SCSI hard disk drives (two logical groups of threedisks)CPU ModuleProcessor (up to two per module) Intel Æ Pentium Æ III ProcessorClock rate: 800 MHzCache: 256 KBOptional Processor Support Upgradeable from one to two processors
