Configuring Your System 3-21SCSI Disk UtilityWhen "Scan SCSI Bus" is selected in the "Fast!Util Options Menu" the utilitymenu appears that is used to format or verify the connected SCSI devices.! CAUTIONDevices can be processed in SCSI buses and SCSI IDs. Becareful not to forget the selected bus and ID.The selection of "Continue With Format" in "Low-LevelFormat" causes all data in disks to be lost.! Low-Level FormatPhysically formats the device selected in "Continue With Format." If youselect "Do Not Format Disk", the prior menu displayed reappears.! Verify Disk MediaVerifies the device selected in "Continue With Verify." If you select "DoNot Verify Media," the prior menu displayed reappears.! Select Different DiskSelects another SCSI device on the same SCSI bus.Select Host AdapterWhen "Select Host Adapter" is selected from the "Fast!Util Options" menu, thelist of the host adapters installed in the main system is displayed. Select theadapter for which the settings are modified.Note : Do Not select Adapter QLA1280 SingleEnded/LVD 5800 it is used for built-in hard disk.The utility menu appears which is used to format or verify the connected SCSIdevices.ExitAfter modifying the settings, press ENTER several times to display the"Fast!Util Options" menu. If you select "Exit Fast!UTIL"from the menu, thescreen for terminating Fast!UTIL appears.However, if the settings are different from those before the start, the screenprompting you to save the settings appears before the display of the terminationscreen.
