Installing the Operating System B-37Graphics AcceleratorStandard graphics accelerator drivers that are mounted will be installed automatically. Thefollowing is the procedure when it is necessary to install manually.NOTE: The graphics accelerator driver is supported only on a server running afull installation. Use VGA on a server running a Server Coreinstallation.1. Insert the NEC EXPRESSBUILDER DVD into the DVD-ROM drive.2. Click Start menu, point to [Programs], [Accessories] and click [Windows Explorer].3. Run "install.bat" in the following directory.Windows Server 2008 64-bit (x64) Edition::\003\win\winnt\ws2008x64\video\install.batWindows Server 2008 32-bit (x86) Edition::\003\win\winnt\ws2008\video\install.batWindows Server 2003 x64 Editions::\003\win\winnt\w2k3amd\video\install.batWindows Server 2003::\003\win\winnt\dotnet\video\install.bat4. Follow the message to continue the installation.If the dialog message "Digital Signature could not been found." appears, select [Yes] tocontinue.5. Remove the NEC EXPRESSBUILDER DVD from the DVD-ROM drive, follow thedirection on the screen and restart the system.Installing Fibre Channel Controller Driver (N8403-018)When the system is Windows Server 2008 64-bit (x64) Edition / Windows Server 200832-bit (x86) EditionIf you use the Fibre Channel Controller Driver (N8403-018), you do not need to install the drivermanually. It is automatically installed by Windows Plug-and-PlayWhen the system is Windows Server 2003 x64 Editions / Windows Server 2003If you use Fibre Channel Controller (N8403-018), update your system with NECEXPRESSBUILDER DVD attached to your system.The Fibre Channel Controller driver will be installed automatically.
