4-8 Configuring Your ServerMemory ConfigurationOption Parameter Description Your SettingInstalled memory nnn MB Indicates the total capacity of the basicmemory. (View only)Available under4GBnnnnnnn MB Indicates the capacity of memoryavailable in the area under 4GB. (Viewonly)CPU1_DIMM1-4StatusNormalDisabledNot installedErrorIndicates the current memory statusinstalled in CPU1_DIMM1 toCPU1_DIMM4."Normal" indicates the normal status,"Disabled" indicates a memory error, "Notinstalled" indicates no DIMM installed, and"Error" indicates the system is forciblystarted with memory error. (View only).CPU2_DIMM1-4StatusNormalDisabledNot installedErrorIndicates the current memory statusinstalled in CPU2_DIMM1 toCPU2_DIMM4."Normal" indicates the normal status,"Disabled" indicates a memory error, "Notinstalled" indicates no DIMM installed, and"Error" indicates the system is forciblystarted with memory error. (View only).Memory Retest [No]YesCauses BIOS to retest all memory on thenext boot.Extended RAMStep1MB1KBEvery location[Disabled]"1MB" indicates that the memory test isdone in the unit of 1MB. "1KB" indicatesthat the memory test is done in the unit of1KB. "Every location" tests every memorylocation. "Disabled" indicates that onlymemory initialization is done.Only pressing Space is acceptable tosuspend the test during the memory test.Memory RASMode[Independent]MirrorLock StepSpecifies the memory RAS mode. See"DIMM" in Chapter 9 for details.NUMAconfiguration[Disabled]EnabledDisables or enables Non-Uniform MemoryAccess feature.[ ]: Factory-set
