Notes on Using Your Server 1-11CAUTIONDo not apply any load on the server pulled out from the rack.Do not apply any load on the server pulled out from the rack. Doing so bendsthe frame of the server. Consequently, the server cannot be pushed back intothe rack. Placing an object on the server may also cause personal injury if theserver drops.Do not connect any interface cable with the power cord of the server pluggedto a power source.Make sure to power off the server and unplug the power cord from a poweroutlet before installing/removing any optional internal device orconnecting/disconnecting any interface cable to/from the server. If the serveris off-powered but its power cord is plugged to a power source, touching aninternal device, cable, or connector may cause an electric shock or a fireresulted from a short circuit.Do not use any unauthorized interface cable.Use only interface cables provided by NEC and locate a proper device andconnector before connecting a cable. Using an authorized cable or connectinga cable to an improper destination may cause a short circuit, resulting in a fire.Also, observe the following notes on using and connecting an interface cable. Do not use any damaged cable connector. Do not step on the cable. Do not place any object on the cable. Do not use the server with loose cable connections.
