Installing Windows Server 2008 R2 D-21Graphics Accelerator DriverIf you use standard graphics accelerator drivers, update your system with NECEXPRESSBUILDER DVD-ROM attached to your system.Standard graphics accelerator drivers will be installed automatically.NOTE: The graphics accelerator driver is supported only on a server running afull installation. Use VGA on a server running a Server Coreinstallation.Observe the following procedure when you want to reinstall the driver individually.1. Insert the NEC EXPRESSBUILDER DVD-ROM into the optical disk drive.If the autorun menu is displayed, close menu screen.2. Click Start menu, point to [Programs], [Accessories] and click [Windows Explorer].3. Run "setup.exe" in the following directory.\017\win\winnt\ws2008x64\video4. Follow the message to continue the installation.If the dialog message "Digital Signature could not been found." appears, select [Yes] tocontinue.5. Remove the NEC EXPRESSBUILDER DVD-ROM from the optical disk drive, restart thesystem.Installing SCSI Controller Driver (N8103-75/107)If you use the SCSI Controller N8103-75/107, you do not need to install the driver manually. It isautomatically installed by Windows Plug-and-Play.Installing SAS Controller Driver (N8103-104A)If you use the SAS Controller N8103-104A, you do not need to install the driver manually. It isautomatically installed by Windows Plug-and-Play.Installing Fibre Channel Controller Driver (N8190-127/131/153/154)If you use the Fibre Channel Controller N8190-127/131/153/154, you do not need to install thedriver manually. It is automatically installed by Windows Plug-and-Play.
