3-20 Setting Up Your ServerCONNECTING POWER CORDConnect the provided power cord to the server.WARNINGObserve the following instructions to use the server safely. Failure to followthese instructions may result in death or serious personal injury. See pages 1-4to 1-11 for details. Do not hold the power plug with a wet hand. Do not connect the ground wire to a gas pipe.CAUTIONObserve the following instructions to use the server safely. Failure to followthese instructions may cause a fire, personal injury, or property damage. Seepages 1-4 to 1-11 for details. Do not plug the power cord in to an improper power source. Do not connect the power cord to an outlet that has an illegal number ofconnections. Insert the power plug into the outlet as far as it goes. Use the authorized power cord only.1. Plug the provided power cord into the power receptacle on the rear of the server.2. Plug the other end of the power cord into the wall outlet.The AC power LED on the power supply turns green and flashes.IMPORTANT: Secure the power cord with an AC cord holder on therear of the server.Power cord for power unit 1Power cord for power unit 2Power unit 2(option)Power unit 2(standard)AC power LED
