1. System BIOSExpress5800/R120f-2E, T120f Maintenance Guide 99Chapter 2 Useful Features1.2.6 Save & ExitIf you move the cursor to Save & Exit, the Save & Exit menu appears.The options of this menu are described below.(a) Save Changes and ExitThe SETUP utility closes with all the changes saved in NVRAM (Non-volatile memory). After the SETUP utilitycloses, the system automatically reboots.(b) Discard Changes and ExitThe SETUP utility closes without saving the changes in NVRAM. The setting at startup of SETUP utility isretained.After the SETUP utility closes, the system automatically reboots.(c) Save Changes and Power OffThe SETUP utility closes with all the changes saved in NVRAM.After the SETUP utility closes, the power of the server is automatically turned off.(d) Discard Changes and Power OffThe SETUP utility closes without saving the changes in NVRAM. The setting at startup of SETUP utility isretained.After the SETUP utility closes, the power of the server is automatically turned off.(e) Load Setup DefaultsThis option resets all values in the SETUP utility to the default settings.Note • The factory-set value may differ from the default value depending on your servermodel. Reconfigure each item according to your environment by referring to thelist of settings in this section.• The values of iSCSI Configuration submenu and UEFI Driver Configurationsubmenu do not return to the default value.
