NEC Exress5800 Series User Manual

Also see for NEC Express5800 Series: User guide User guide User guide User guide Configuration guide

Contents

3. EXPRESSSCOPE Engine 3Express5800/R120g-2E User's Guide168Chapter 3 Setup4. On Off-line TOOL MENU, select Server Configuration Utility → EXPRESSSCOPE Engine 3 →Configuration → Network → IPv4 Property or IPv6 Property.5. On the following screen, select Enable when you use DHCP, or select Disable and specify IP Address(Required), Subnet Mask (Required), Default Gateway, and DNS Server when you do not use DHCP.Tips If Shared BMC LAN is enabled, Web feature, remote media/KVM feature, or commandline interface feature may be interrupted. In this case, wait for a while, and connect withnetwork again.When IPv4 Property is selected6. Connect the LAN cable to the management LAN connector in order to connect to the network. It will beavailable for use if you access EXPRESSSCOPE Engine 3 via Web browser from management PCaccording to the setting.