3. GlossaryExpress5800/R120g-2E User's Guide180Chapter 4 Appendix3. GlossaryTerms DescriptionBIOS Setup Utility (SETUP) Software for setting BIOS. You can run this software by pressing key duringPOST.BMC Baseboard Management Controller (BMC) is a built-in controller that supports theIPMI version 2.0 protocol. BMC can manage the server hardware.BMC RESET Switch A switch for resetting the BMC of the server. This resets the BMC without clearing theBMC settings.Use the switch if the problem on the BMC occurs.DUMP Switch A switch that is used for collecting the memory dump if an error occurs. You canspecify the destination of the dump by using the OS function.EXPRESSBUILDER Standard software for setting up the server easily. This also includes several usefulapplications and instruction manuals.EXPRESSSCOPE ENGINE 3 A name of BMC for NEC Express5800 series.EXPRESSSCOPE Profile Key A removable flash memory that stored the settings of BIOS and BMC. If themotherboard of the server is replaced, you can use former settings when moving thisflash memory from the former motherboard.Express Report Service Software that can report the server failure to the contact center by E-mail or modem.This software is installed with NEC ESMPRO ServerAgentService to the server.Express Report Service (HTTPS) Software that can report the server failure to the contact center by HTTPS. Thissoftware is installed with NEC ESMPRO ServerAgentService to the server.Express Report Service (MG) Software that can report the server failure to the contact center by E-mail, modem orHTTPS without NEC ESMPRO ServerAgentService. This software is installed withNEC ESMPRO Manager to "PC for Management".ExpressUpdate A feature for updating BIOS, firmware, driver, or software of the server. This feature isavailable when NEC ESMPRO Manager cooperates with EXPRESSSCOPE ENGINE3 and ExpressUpdate Agent.ExpressUpdate Agent Software for performing ExpressUpdate. This is installed to the server.Flash FDD An optional USB device that can use as a floppy disk drive.Internal Flash Memory A built-in flash memory that stored EXPRESSBUILDER as standard. You can startEXPRESSBUILDER from it without DVD when pressing key during POST.NEC ESMPRO Standard software for the server management. This consists of several applicationsfor managing or monitoring.NEC ESMPRO Agent Extension Software for performing the scheduled operations. This works with NEC ESMPROManager.NEC ESMPRO Manager Software for managing plural servers on network.NEC ESMPRO ServerAgentService Software for monitoring the server. This works with NEC ESMPRO Manager. You canchoose Service Mode or Non-Service Mode when installing this software. ServiceMode resides as the OS service and Non-Service Mode does not use the OS serviceto reduce memory, CPU power and other OS resources.OEM driver A Windows driver for the mass storage device.OS standard installer An installer that stored in Windows installation disc. Use this installer if you want toinstall the OS manually.Offline tools Software that can confirm or change SEL, SDR, FRU, and other IPMI data. You canstart Offline tools when pressing key during POST.PC for Management A computer for managing the server on network. A general Windows/Linux computercan be used as "PC for Management".Product Info Collection Utility Software for collecting several hardware/software statuses or event logs. You caneasily collect the data for the server maintenance by using this software.RAID Configuration Utility Software for configuring RAID arrays. You can run this software during POST.Server Configuration Utility Software for setting BIOS or BMC. You can use as Windows application or run thissoftware when pressing key during POST. This software is the same as BMCConfiguration of former models.Starter Pack Software package for the server. This software includes the customized drivers forWindows. This must be installed before using Windows on the server.TPM Kit An optional product of Trusted Platform Module for the server.Universal RAID Utility Software for setting RAID arrays on Windows/Linux. This software is operated on "PCfor Management" with NEC ESMPRO Manager.Windows OS parameter file A file that saved settings for installing Windows. You can install with the savedsettings in this file when setting Windows with EXPRESSBUILDER.
