4. Names and Functions of PartsExpress5800/R120g-2E User's Guide 33Chapter 1 General Description4.7 Status Indicators4.7.1 POWER LED ( )POWER LED indicates power ON/OFF status of the server.POWER LED pattern DescriptionOn (green) The server is normally powered on.Off The server is off-powered.The server is in halt status.4.7.2 STATUS LED 1, 2 ( )While hardware is operating normally, STATUS LED 1 lights green. STATUS LED 2 is off.STATUS LED 1 is off or STATUS LED 2 lights/flashes amber if there is a hardware failure.Tips If NEC ESMPRO is installed, you can view error logs to check the causes offailures.STATUS LED 1, 2 pattern Description SolutionSTATUS LED 1 STATUS LED 2On (green) Off The server is operating normally. –On (green) On (amber) Initialization of BMC is in progress. Wait until initialization completes.Flashing (green) Off Memory is in a degraded state Identify the device in degraded state by usingBIOS Setup Utility (SETUP), and replace it assoon as possible.Operating while CPU error is detected.In redundant power configuration, power isnot supplied to either of power unit.Off Off The power is off. Turn on the server.POST is in progress. Wait for a while. STATUS LED will turn greenafter POST completes.Watchdog timer expired. Turn the power off and then turn it on.If POST screen displays any error message,take notes of the message, and contact yoursales representative.Memory dump is being requested.Note: It remains green if the dump is causedby software.Wait until the memory dump is completed.
