NEC GT950 User Manual

Also see for GT950 - MultiSync XGA LCD Projector: Specifications Quick connect guide Installation guide

Contents

NEC GT950 User Manual Manual pdf 10 page image

E – 10ABDSOURCERIGHTLEFTSELECTLENS SHIFTFOCUSUPDOWNZOOMSTATUSPOWERON/STAND BYAUTOADJUSTMENUENTERCANCELSetting the Projector for Vertical PlacementThis projector has a portrait function that supports the portrait displaysetting of a personal computer.Pivot® software included in the supplied CD-ROM2If the personal computer does not have a driverfor portrait display, install the dedicated driverfrom the supplied CD-ROM2. See the manualsupplied with the CD-ROM2 for details.Pivot® and the Pivot Enabled® logo are registered trademarks of Por-trait Displays, Inc. Copyright 1993-2000 Portrait Displays, Inc. All RightsReserved.U.S. PAT. #5,973,664NOTE: We do not support the Pivot® software because of a sample. This samplesoftware is not covered under the warranty.1 InstallationFor installation, see the instructions in the WINPORTRAITR® IN-STRUCTIONS included with the supplied CD-ROM2.2. To rotate the display on a PC, use any of the three following meth-ods:* Right-click anywhere on the desktop, and then select “Rotate” fromthe shortcut menu.* Left-click the Pivot® icon on the taskbar, and then select “Rotate”from the shortcut menu.* Press the Ctrl, Shift, and R keys at the same time.3. To return the display to the landscape orientationRepeat any one of the three methods above.NOTE:* This driver is for exclusive use with Windows 95/98/Me/NT 4.0/2000 andangle of 270 degrees counterclockwise rotation only.* Left-click the Pivot icon on the taskbar and then select “Help” to get help.NOTE: See the installation method described in the supplied CD-ROM2 for in-stallation details.See Page E-43 for information about making the on-screen display support theportrait display mode.1. Remove the 2 Screws of the Main UnitKeep these screws in a safe place.2. Attach the Supplied Vertical Stand to the Screw Holes of theMain UnitPlace the Projector Upright and Use Check that the portrait settingis to “Auto” or “On” under “Projector Options” → “Setup” → “Page 1”of the menu. (See Page E-43)Corner Placement of the ProjectorTurn the 4 screws of the vertical stand’s auxiliary stand counterclock-wise until they turn freely; they will not come out. Then, remove theauxiliary stand.Attach the stand to the main unit after this.· Do not use the projector with the top surface against a wall.Doing so will block the ventilation openings and the internaltemperature will rise.· Do not place the projector with the lamp side (i.e., the side onwhich the handle is located) facing downward. This could leadto the projector breaking down.To use this function, attach the supplied stand to the projector andplace the projector to stand vertically.