NEC GT950 User Manual

Also see for GT950 - MultiSync XGA LCD Projector: Specifications Quick connect guide Installation guide

Contents

NEC GT950 User Manual Manual pdf 33 page image

E – 334. Return the image to the original size.Correcting Keystone distortionPress (+) or (-) to correct keystone (trapezoidal) distortion to make thetop or bottom of the screen longer or shorter so that the projectedimage is rectangular.NOTE: The maximum keystone angle that can be corrected is 30 degrees up-ward and 30 degrees downward with the projector placed horizontally on theground plane.Depending on the type of graphics being used, the picture may get blurred orkeystone correction may not be possible when excessive keystone correctionis used.The idea is, the closer you are to native resolution, the better image you willsee.In Portrait mode, correct the keystone so that the height at the left and right ofthe screen may look the same.Freezing a picturePress the Freeze button to freeze a picture. Press again to resumemotion.Keystone distortion NormalMAGNIFYKEYSTONEFREEZECustomizing Basic/Custom MenuThe Basic/Custom menu can be customized to meet your requirements.Selecting a menu item from the “Basic/Custom Menu Edit” list, allowsyou to custom tailor the menu items to your needs.1. Select “Basic/Custom Menu Edit” to display the “Basic/CustomMenu Edit” screen.Using the MenusNOTE: The on-screen menu may not be displayed correctly while interlacedmotion video image is projected.1. Press the “Menu” button on the remote control or projector cabi-net to display the Main Menu.NOTE: When using a USB mouse, click the mouse button to display themain menu. For other operations, do the same way as you use your PCmouse.2. Press the buttons on the remote control or the projector cabi-net to highlight the menu for the item you want to adjust or set.3. Press the button or the “Enter” button on the projector cabinetor the remote control to select a submenu or item.4. Adjust the level or turn the selected item on or off by using “Se-lect” or buttons on the cabinet or the remote control. The on-screen slide bar will show you the amount of increase or decrease.5. Changes are stored until you adjust it again.ENTER ......... Stores the setting or adjustments.CANCEL .......... Return to the previous screen without storing settings or ad-justments.NOTE: You can close the main and sub menus simultaneously by pressingthe PJ button to cancel the Projector mode.6. Repeat steps 2-5 to adjust an additional item, or press “Cancel”on the projector cabinet or the remote control to quit the menudisplay.