NEC GT950 User Manual

Also see for GT950 - MultiSync XGA LCD Projector: Specifications Quick connect guide Installation guide

Contents

NEC GT950 User Manual Manual pdf 29 page image

E – 29Set up the projector1. Turn on the projector2. Select your type of projection:Desktop front, ceiling rear, desktop rear, and ceiling front.3. Select the Computer, Video Source or PC Card ViewerPress a source button on the remote control or the projector cabi-net to select “Video” (VCR, document camera, or laser discplayer), S-Video”, “RGB” (computer or DVD with componentoutput), “DVI DIGITAL/ANALOG” or “PC Card Viewer” to dis-play the image.Or press the “Menu” button on the remote control or the cabinetand use the menu to select your video source: “Video”, “S-Video”,“RGB”, “DVI DIGITAL/ANALOG”, or “PC Card Viewer”.4. Adjust the image position and the image size.(1) Press the SHIFT button to display the Lens Shift adjustment screen.Use the Select button on the remote control to move the image horizon-tally, vertically or diagonally.To close the Lens Shift adjustment screen, press the CANCEL button.See page E-20 for “Lens Shift Adjustable Range”.Projected image position can be shifted by using the LENS SHIFT buttonon the cabinet.Pressing two arrow buttons at the same time can move the lens diago-nally.(2) Press the ZOOM button to display the Zoom adjustment screen.Use the Select / button on the remote control to adjust the imagesize.To close the Zoom adjustment screen, press the CANCEL button.You can also adjust the image size by using the ZOOM + or –button on theprojector cabinet.(3) Press the FOCUS button to display the Focus adjustment screen.Use the Select / button on the remote control to adjust the focus.To close the Focus adjustment screen, press the CANCEL button.You can also adjust the image size by using the FOCUS + or –button onthe projector cabinet.SELECTSHIFTZOOMZOOMFOCUSFOCUSNOTE: In some cases the image may move down a little immediately after alens shift adjustment has been made in the downward direction.(When a lens shift adjustment has been made in the upward direction, thisimage movement will not occur)