E – 47LensAfter setting Shift, Speed, and Zero Position, select [OK] and press theENTER button.To cancel, select [Cancel] and press the ENTER button.Shift:This option adjusts the image position.Pressing the Adjustment button displays the Lens Shift adjustmentscreen.Use the Select buttons (, , , ) to shift the image horizontally,vertically, or diagonally.To move the image diagonally, use two Select buttons simulta-neously.Example: To move the image in the upper right-hand corner of thescreen, press the Select and buttons at the same time.Speed:This option selects two speed modes for lens shift.Normal: This is the default setting that allows the lens shift motor torun fast.Fine: This is the fine-adjustment setting that allows the lens shiftmotor to run slowly.Zero Position:Returns the lens position to the default setting.Select [Zero Position] and press the ENTER button. Next select[OK] and press the ENTER button.To cancel, select [CANCEL] and press the ENTER button.Within lens shift adjustment, Zero position movement has an error of1.5% (20 mm/0.8 inches in 60" screen).[Status]Displays the status of the LAN settings.IP Address ......... Indicates the IP address of the projector.Subnet Mask ...... Indicates the subnet mask of the projector.MAC Address ..... Indicates the MAC address of the LAN card.
