E-15Connecting Your DVD PlayerPC CONTROL RGB IN DVI-D INSC TRIGGERVIDEO IN S-VIDEO INS-VIDEOS-VIDEO RGB/DVIRGB/DVIVIDEOVIDEO AUDIO INAUDIO INCOMPONENTY Cb/Pb Cr/PrCOMPONENT INAUDIO OUTR LCOMPONENT OUTAUDIO INL RDVD playerYou can connect your projector to a DVD player with component outputor Video output. To do so, simply:1. Turn off the power to your projector and DVD player.2. If your DVD player has the component video (Y,Cb,Cr) output, usethe supplied component video cable (RCA3) to connect your DVDplayer to the COMPONENT IN connectors on the projector.For a DVD player without component video (Y,Cb,Cr) output, use com-mon RCA cables (not provided) to connect a composite VIDEO out-put of the DVD player to the Video Input of the projector.Use an audio cable (not supplied) to connect the audio from yourVCR or laser disc player to your audio equipment (if your VCR orlaser disc player has this capability). Be careful to keep your right andleft channel connections correct for stereo sound.3. Turn on the projector and DVD player.Component video RCA3 cable(supplied)NOTE: Refer to your DVD player's owner's manual for more information aboutyour DVD player's video output requirements,Audio cable (not supplied)Audio EquipmentAudio cable(supplied)COMPONENTAUDIO IN
