NEC HT1000 User Manual

Also see for HT1000 Series: Control commands Command guide Command guide Control commands Compatibility chart

Contents

NEC HT1000 User Manual Manual pdf 48 page image

E-44MailAlert Mail:Checking this box enables Alert Mail feature.This option notifies your computer of an error message via e-mailwhen using wired LAN. The error message will be notified when theprojector lamp has reached the end of its usable life or an error oc-curs in the projector.Sample of a message sent from the projector:The lamp is at the end of its usable life. Please replace the lamp.Projector Name: X X X XLamp Hour Meter: xxxx [H]Projector Usage: xxxxxx [H]Sender's Address:Specify the senders address. Use the Software keyboard. Up to 60alphanumeric and symbols characters can be used. See "Using Soft-ware Keyboard" in Appendix for more details.SMTP Server Name:Type in the SMTP server name to be connected to the projector. Upto 60 alphanumeric characters can be used.Recipient's Address 1 to 3:Type in your recipient's address. Up to 60 alphanumeric and symbolscharacters can be used.Test Mail:Send a test mail to check if your settings are correct.NOTE: If you entered an incorrect address in a test, you may not receive anAlert mail. Should this happen, check if the Recipient's Address is correctlyset.NOTE: Unless any one of the "Sender's Address", "SMTP Server's Name" or"Recipient's Address 1-3" is selected, "Test Mail" is not available.NOTE: Be sure to highlight “OK” and press the ENTER button before execut-ing “Test Mail”.StatusDisplays the status of the LAN settings.IP Address ..... Indicates the IP address of the projector.Subnet Mask .. Indicates the subnet mask of the projector.MAC Address . Indicates the MAC address of the LAN card.