NEC HT1000 User Manual

Also see for HT1000 Series: Control commands Command guide Command guide Control commands Compatibility chart

Contents

NEC HT1000 User Manual Manual pdf 32 page image

E-28Auto Play ModeIf the "Auto Play" option is selected in "Viewer Options" of the menu,any given slide will start to play automatically.You can also specify Auto Play Interval between 5 and 300 seconds.Switching to Slides Directly from Other Input ModesWith this function it is possible to switch directly to a slide when thepicture of a VCR or computer is being projected.Example: When conducting presentations using a combination of slidesand moving pictures from a VCR, etc., it is possible to switch from aViewer slide to the video picture then back to the Viewer slide simply byusing the Viewer button.NOTE: Even if you switch the current Viewer source to another source, the cur-rent slide is retained. When you return back to the Viewer, you will get the slidethat has been retained.Viewing Digital ImagesDigital images can be played with the Viewer if the following conditionsare met:• If the image can be stored on an MS-DOS format PC card• If the image can be stored in a format supported by the Viewer. Withthe Viewer, images on the card are searched for in directories andimages in JPEG or BMP format are recognized as slides. Searchabledirectories are directories within two steps from the root directory,and searchable images are images within the first 12 files in the di-rectory. Only file and slide switching are possible.NOTE: The maximum number of images recognized as slides within one direc-tory is 128.Storing Images Displayed on the Projector on the PCcard (Capture)The Capture features allows you to capture an image from a source thatis currently being displayed. The image is saved as JPEG in the PCcard. When you select Capture from the menu, you will get a tool bar.You can capture an image directly using the tool bar when the menu isnot displayed.NOTE:* Signals from DVI input are not possible to be captured.* Unless a PC card is inserted into the PC Card slot of the projector, the Capturefeature is not available.* The "Card Error" display means that the free space of the PC card is insufficientfor saving images. Make more space available on the card by erasing un-wanted images with your PC. The number of images that can be captureddepends on the size of the PC card.* Be sure not to turn off the power or remove the PC card while capturing animage. Doing so could cause a loss of the data in the PC card or damage to thecard itself.Preparations:Insert the PC card into the card slot.Insert the PC card so that the end with the insertion direction arrowon the top goes in first.* Press the eject button to eject the card.1. Project the image you wish to store on the projector.2. Select the "Capture" from the Tools menu.FreezeExitCapture3. A tool bar will appear.The tool bar includes the following buttons:Capture ....... Captures an image and save it as a JPEG file in a PCcard.Freeze ......... Freezes and unfreezes images.Exit .............. Exits the Capture function. Another option to exit the Cap-ture function is to press MENU or CANCEL button on theremote control or projector cabinet.NOTE:You can compress a captured file (JPEG) using the Capture Options in the Setupdialog. See page E-41.Captured images with higher resolution than the projector's native resolutioncannot be displayed correctly.• File size of the captured image varies depending on the resolution of an inputsignal.• An hourglass indicating that an image is being captured appears on theprojector's display. Do not eject the PC card or turn off the projector's powerwhile this icon is displayed. Doing so will damage the PC card data. If the PCcard data is damaged, use a computer to repair the data.• Up to 12 indexes can be displayed on the list of folders. The folder in the rightbottom is always a folder exclusively for captured images, but is only dis-played when images have been captured.