English-11EnglishFigure 6Figure 7Figure 8Main switch cover(with stand)The longer side of thecover is toward the bottomof the display.Main switch cover(without stand)The shorter side of thecover is toward the bottomof the display.Screw Holes250mmScrewCord or chainClamp3. Ventilation RequirementsWhen mounting in an enclosure or in a recessed area allowheat to disperse, leave space between surrounding themonitor and surrounding objects allow heat to disperse, asshown in Figure 6.4. Main Power Switch CoverThe Main Switch Cover will be attached in one of two ways,depending on the orientation of the monitor. When the MainSwitch Cover is used when the stand is attached the longerside of the cover will go underneath. When used withoutthe stand, the short side of the cover will go underneath(Figure 7).5. Prevent TippingWhen using the display with the Tabletop Stand fasten theLCD to a wall using a cord or chain that can support theweight of the monitor (approx. M40: 32.6Kg/M46: 39.3Kg) inorder to prevent the monitor from falling. Fasten the cord orchain to the monitor using the provided clamp and screw(Figure 8).Before attaching the LCD monitor to the wall, make surethat the wall can support the weight of the monitor.Be sure to remove the cord or chain from the wall beforemoving the LCD.01_English 18/12/06, 8:52 AM11