English-20Connecting to a TV*Precautions when connecting the antenna• Use a coaxial cable which is free frominterference. Avoid using a parallel flat wire asinterference may occur, causing the receptionto become unstable and noise to appear on thescreen.• Avoid using an indoor antenna as this may beaffected by interference and poor reception.• Cable distribution system should be grounded(earthed) in accordance with ANSI/NFPA 70,the National Electrical Code (NEC), inparticular Section 820.93, Grounding of OuterConductive Shield of a Coaxial Cable.• Keep the power cord as far away from theantenna wire as possible.• Auto Tuning. Please refer to page 29.VHF(300-Ohm) antenna / UHF antenna• When using a 300-ohm twin lead from anoutdoor antenna, connect the VHF or UHFantenna leads to the screws of the VHF or UHF adapter.Plug the 300-ohm to 75-ohm adapter into the antenna on the LCD MONITOR.• When both VHF and UHF antennas are combined: Attach an optional antenna cable signal combiner to the LCDMONITOR antenna terminal, and connect the cables to the antenna mixer. Consult your local electronics retailer aboutavailable signal combiners.Reconnect the unit to the power source and turn on the power• Using the Remote Control or User Controls, select the “TV TUNNER”. Select the appropriate menu based upon whichsource (cable or antenna) is being used.• Refer to page 29 for further information on the “TV TUNNER” as well as for information on how to use the “CHANNELSEARCH” function to program available channels.CAUTION: The screen of the coaxial cable is intended to be connectd to earth in the building installation.TELETEXT SELECTPress the button between TV (VIDEO) picture, TELETEXT orMIXED.TV PICTURE TELETEXT MIXED [TV & TELETEXT]PAGE SELECTIONUse the KEYPAD buttons 0 to 9 to select the required page (3 digitnumber).PAGE UP/DOWNPress the CH +/- buttons to increase or decrease the page numberselected.HOLDSome TELETEXT information is contained in more than one page.The pages automatically changing after a given reading time.Press the STILL ON/OFF button to stop the page changing (thesymbol will appear on the page heading).Press the STILL ON/OFF button again to allow the page to change(the symbol will disappear).REVEALSome TELETEXT pages contain quiz or game questions withhidden answers.Press the STILL CAPTURE button to see the answers.Press the STILL CAPTURE button again to hide the answers.CANCEL1. Periodically revised NEWS FLASHES can be obtained fromTELETEXT broadcasts.Select the News Flash page in TELETEXT mode then press thePIP ON/OFF button.You can now watch the TV program and every time the newsflash page is updated it will be automatically displayed in the TVpicture.Press the PIP ON/OFF button to cause the news flash todisappear.2. When a page is selected in TELETEXT mode it may take sometime before it becomes available, pressing the PIP ON/OFFbutton will switch to the TV mode.When the required page is found the page number will appear atthe top of the TV picture, press the PIP ON/OFF button to returnto the selected TELETEXT page.Note: You cannot change TV program while in this mode.FAST TEXT (For possible future reference)The “PICTURE MODE”, “SIZE”, “SOUND” and “AUDIO INPUT”buttons are used for quick access to color coded pages transmittedby FAST TEXT broadcast.RED: PICTURE MODEGREEN: SIZEYELLOW: SOUNDCYAN: AUDIO INPUTINDEXPress the GUIDE button to select the INDEX page.*: The product you purchased may not have this feature.01_English 18/12/06, 8:52 AM20