NEC MULTEOS M40 User Manual

Also see for M40 - MULTEOS - 40" LCD TV: Specifications Specifications User manual Features and benefits Manual

Contents

NEC MULTEOS M40 User Manual Manual pdf 9 page image

English-3EnglishFOR OPTIMUM PERFORMANCE, PLEASE NOTE THEFOLLOWING WHEN SETTING UP AND USINGTHE MULTI-FUNCTION MONITOR:• DO NOT OPEN THE MONITOR. There are no userserviceable parts inside and opening or removing coversmay expose you to dangerous shock hazards or other risks.Refer all servicing to qualified service personnel.• Do not spill any liquids into the cabinet or use your monitornear water.• Do not insert objects of any kind into the cabinet slots, asthey may touch dangerous voltage points, which can beharmful or fatal or may cause electric shock, fire orequipment failure.• Do not place any heavy objects on the power cord.Damage to the cord may cause shock or fire.• Do not place this product on a sloping or unstable cart,stand or table, as the monitor may fall, causing seriousdamage to the monitor.• When operating the MULTEOS monitor with its AC 220-240V power supply in Europe, use a power supply cordprovided with the monitor.• In UK, use a BS-approved power cord with molded plughaving a black (13A) fuse installed for use with this monitor.If a power cord is not supplied with this monitor, pleasecontact your supplier.• When operating the MULTEOS monitor with a 220-240V ACpower source in Australia, use the power cord provided withthe monitor. If a power cord is not supplied with thisequipment, please contact your supplier.• For all other cases, use a power cord that matches the ACvoltage of the power outlet and has been approved by andcomplies with the safety standard of your particular country.• Do not place any objects onto the monitor and do not usethe monitor outdoors.• The inside of the fluorescent tube located within the LCDmonitor contains mercury. Please follow the bylaws or rulesof your municipality to dispose of the tube properly.• Do not bend, crimp or otherwise damage the power cord.• If glass is broken, handle with care.• Do not cover vent on monitor.• Do not use monitor in high temperature, humid, dusty, oroily areas.• If monitor or glass is broken, do not come in contact with theliquid crystal and handle with care.• Allow adequate ventilation around the monitor, so that heatcan properly dissipate. Do not block ventilated openings orplace the monitor near a radiator or other heat sources.Do not put anything on top of the monitor.• The power cable connector is the primary means ofdetaching the system from the power supply. The monitorshould be installed close to a power outlet, which is easilyaccessible.• Handle with care when transporting. Save packaging fortransporting.• Please clean the holes of back cabinet to reject dirt anddust at least once a year because of set reliability.• If using the cooling fan continuously, it’s recommended towipe holes a minimum of once a month.Immediately unplug your monitor from the wall outlet and referservicing to qualified service personnel under the followingconditions:• When the power supply cord or plug is damaged.• If liquid has been spilled, or objects have fallen into themonitor.• If the monitor has been exposed to rain or water.• If the monitor has been dropped or the cabinet damaged.• If the monitor does not operate normally by followingoperating instructions.Recommended Use• For optimum performance, allow 20 minutes for warm-up.• Rest your eyes periodically by focusing on an object at least5 feet away. Blink often.• Position the monitor at a 90° angle to windows and otherlight sources to minimize glare and reflections.• Clean the LCD monitor surface with a lint-free, non-abrasivecloth. Avoid using any cleaning solution or glass cleaner!• Adjust the monitor’s brightness, contrast and sharpnesscontrols to enhance readability.• Avoid displaying fixed patterns on the monitor for longperiods of time to avoid image persistence (after imageeffects).• Get regular eye checkups.ErgonomicsTo realize the maximum ergonomic benefits, we recommendthe following:• Use the preset Size and Position controls with standardsignals.• Use the preset Colour Setting.• Use non-interlaced signals.• Do not use primary colour blue on a dark background, as itis difficult to see and may produce eye fatigue due toinsufficient contrast.Cleaning the LCD Panel• When the liquid crystal panel is stained with dust or dirt,please wipe with soft cloth gently.• Please do not rub the LCD panel with hard material.• Please do not apply pressure to the LCD surface.• Please do not use OA cleaner it will cause deterioration ordiscolor on the LCD surface.Cleaning the Cabinet• Unplug the power supply• Gently wipe the cabinet with a soft cloth• To clean the cabinet, dampen the cloth with a neutraldetergent and water, wipe the cabinet and follow with a drycloth.NOTE: The surface of the cabinet is composed of many typesof plastic. DO NOT clean with benzene thinner, alkalinedetergent, alcoholic system detergent, glass cleaner,wax, polish cleaner, soap powder, or insecticide.Rubber or vinyl should not be in contact with the cabinetfor an extended period of time. These types of fluidsand materials can cause the paint to deteriorate, crackor peel.Safety Precautions, Maintenance & Recommended Use01_English 18/12/06, 8:52 AM3