NEC MultiSync LCD4020 User Manual

Also see for MultiSync LCD4020: Specifications Specifications Manual User manual User manual

Contents

NEC MultiSync LCD4020 User Manual Manual pdf 18 page image

English-16Connect the LCD Monitor to Macintosh• To connect the VGA IN connector (mini D-sub 15 pin) on the LCD monitor, use the supplied PC - Video RGB signal cable(mini D-sub 15 pin to mini D-sub 15 pin).• To connect the RGB/HV IN connector (BNC) on the LCD monitor, use a mini D-sub 15 pin to BNC x 5 signal cable (soldseparately) (BNC INPUT only).• If you use with a Macintosh PowerBook, set “Mirroring” to Off.Refer to your Macintosh’s owner’s manual for more information about your computer’s video output requirements and anyspecial identification or configuring your monitor’s image and monitor may require.• AUDIO IN* 1, 2 and 3 can be used for audio input. To select audio source [IN1], [IN2] or [IN3] press the AUDIO INPUTbutton.Connecting to a Macintosh ComputerConnecting your Macintosh computer to your LCD monitor will enable you to display your computer’s screen image. Somevideo cards or drivers may not display images correctly.LCD monitorLCD monitor (second monitor)BNC x 5BNC x 5MacintoshBNC x 5Mini D-sub 15 pinMini D-sub 15 pinTo audio outputTo RGB/HV INTo analog RGB outputBNC INPUT only*: The product you purchased may not have this feature.