NEC MultiSync LCD4020 User Manual

Also see for MultiSync LCD4020: Specifications Specifications Manual User manual User manual

Contents

NEC MultiSync LCD4020 User Manual Manual pdf 24 page image

English-22Picture ModeDVI,VGA, RGB/HV STANDARD sRGB HIGHBRIGHTHDMI*, DVD/HD*, STANDARD CINEMA* HIGHBRIGHTVIDEO*, TV*Information OSDThe Information OSD provides information such as:Monitor ID, Input Source, Picture Size, etc. Press theDISPLAY button on the remote to bring up the InformationOSD.NORMAL: Displays the aspect ratio the same as it is sentfrom the source.FULL: Fills entire screen.WIDE*: Expands a 16:9 letter box signal to fill entire screen.ZOOM (DYNAMIC): Expands a 4:3 pictures to fill the entirescreen with non-linearity. Some of the outside image areawill be cut off due to expansion.ZOOMThe image can be expanded beyond the active display area.The image which is outside of active display area is notshown.ZOOMZOOM1 ID number assigned to current monitor* 32 ID number assigned monitor to be controlled via RS-232C* 43 Input Source4 Audio input mode5 Picture size6 Input Signal Information7 Sub picture information*3: “IR CONTROL” should be set “Primary” or “Secondary”.*4: “IR CONTROL” should be set “Primary”.*: The product you purchased may not have this feature.Using Power ManagementThe LCD monitor follows the VESA approved DPM PowerManagement function.The power management function is an energy savingfunction that automatically reduces the power consumptionof the display when the keyboard or the mouse has not beenused for a fixed period.The power management feature on your new display hasbeen set to the “ON” mode. This allows your display to entera Power Saving Mode when no signal is applied. This couldpotentially increase the life and decrease the powerconsumption of the display.STANDBY mode is used when the display is connected toan RS-232C cable or when using the INPUT DETECTfunction.ECO STANDBY uses less power, put the RS-232C andINPUT DETECT functions are not available.Selecting a video source*To view a video source:Use the input button to set [VIDEO].Use the COLOR SYSTEM menu to set [AUTO], [NTSC],[PAL], [SECAM], [PAL60], [4.43NTSC], according to yourvideo format.Picture SizeDVI,VGA, RGB/HV FULL ZOOM NORMALHDMI*, DVD/HD*, FULL WIDE* ZOOM NORMALVIDEO*, TV*Aspect ratioof imageNORMALZOOM(DYNAMIC)FULLWIDE*4:3SqueezeLetterboxUnchanged view* 1 Recommended selectionfor picture size*1* 1 Grey areas indicate unused portions of the screen.Power Indicator*Mode Status Indicator LightPower ON Green* 2Power OFF (Eco Standby)* 1 RedPower consumption under 1WPower OFF (Standby) AmberPower consumption under 5WPower Save Amber BlinkingPower Standby when Green and Amber“SCHEDULE SETTINGS” enabled blink alternatelyDiagnosis (Detecting failure) Red Blinking(See Troubleshooting page 38)*1 When in Eco Standby Mode RS-232C controls do not function.*2 If “OFF” is selected in POWER INDICATOR (page 27), the LED will notlight when the LCD monitor is in active mode.