NEC MultiSync LCD4020 User Manual

Also see for MultiSync LCD4020: Specifications Specifications Manual User manual User manual

Contents

NEC MultiSync LCD4020 User Manual Manual pdf 30 page image

English-28INPUT DETECT Selects the method of input detection the monitor uses when more than two input devices FIRST DETECTAll inputs except for TV are connected.NONE The Monitor will not search the other video input ports.FIRST DETECT When the current video input signal is not present, then the monitor searches for a video signalfrom the other video input port. If the video signal is present in the other port, then the monitorswitches the video source input port to the new found video source automatically.The monitor will not look for other video signals while the current video source is present.LAST DETECT When the monitor is displaying a signal from the current source and a new secondary sourceis supplied to the monitor, the monitor will automatically switch to the new video source.When current video input signal is not present, the monitor searches for a video signal fromthe other video input port. If the video signal is present in the other port, then the monitorswitches the video source input port to the new found video source automatically.VIDEO DETECT* DVD/HD or VIDEO inputs will have priority over DVI, VGA, RGB/HV. When DVD/HD orVIDEO input signal is present the monitor will change and keep to the DVD/DH or VIDEOinput.LONG CABLE ON/OFF Compensates for image degradation caused from using a long cable. OFFVGA, RGB/HV inputs onlyLONG CABLE MANUAL Manually compensates for image degradation caused from using a long cable.VGA, RGB/HV inputs onlyRED DELAY Adjusts the phase of the red signal. 0GREEN DELAY Adjusts the phase of the green signal. 0BLUE DELAY Adjusts the phase of the blue signal. 0RED SHARPNESS Adjusts the performance degradation of the RED signal. 23GREEN SHARPNESS Adjusts the performance degradation of the GREEN signal. 23BLUE SHARPNESS Adjusts the performance degradation of the BLUE signal. 23SOG PEAK. Adjusts the shape of Sync on Green signal. 0VIDEO EQ. Optimize the shape (Tailing) of RED, GREEN and BLUE signals. 0RGB/HV input onlySYNC TERMINATE Selects the terminate resistance for matching the cable impedance. HIGHRGB/HV input onlyDVI MODE Selects the kind of DVI-D equipment which is connected DVI. DVI-PCSelect “DVI-PC” when PC or other computer equipment is connected.Select “DVI-HD” when DVD player, which has DVI-D output, is connected.SCAN CONVERSION Selects the IP (Interlace to Progressive) conversion function. PROGRESSIVEAll inputs except VGA, RGB/HV Note: For DVI input “DVI-HD” need to be enabled in the DVI mode menu.PROGRESSIVE Converts interlaced signals to progressive. This is the default setting.INTERLACE Disables IP conversion. This setting is best suited for motion pictures, but increases the riskof image retention.SCART MODE* Input mode for devices using SCART connectors. OFFS-VIDEO MODE* Selects the S-Video input port function. PRIORITYPRIORITY When an S-Video cable is connected to the S-Video input, it will have priority over thecomposite input port.SEPARATE The S-Video port and Composite port can be selected as independent input ports.COLOR SYSTEM* The selected Color System depends on the video format of the input signal. AUTOVIDEO input onlyAUTO Automatically chooses Color System setting based on input signal.NTSCPALSECAM4.43NTSC*: The product you purchased may not have this feature.ADVANCED OPTION