NEC MultiSync LCD4020 User Manual

Also see for MultiSync LCD4020: Specifications Specifications Manual User manual User manual

Contents

NEC MultiSync LCD4020 User Manual Manual pdf 29 page image

English-27EnglishMONITOR ID Sets the monitor ID number from 1-26. 1IR CONTROL Selects the mode of the monitor for use with the infra-red remote control when using the NORMALRS-232C daisy chain.NORMAL The monitor will be controlled normally by wireless remote controller.PRIMARY Choose “PRIMARY” for the first monitor within an RS-232C daisy chain.SECONDARY Choose “SECONDARY” for all subsequent monitors within an RS-232C daisy chain.LOCK Prevents the monitor from being controlled by wireless remote controller. To return to normaloperation, press the “DISPLAY” button on the remote controller for 5 seconds.TILE MATRIX Allows one image to be expanded and displayed over multiple screens (up to 25) through adistribution amplifier.H MONITORS Number of monitors arranged horizontally. 1V MONITORS Number of monitors arranged vertically. 1POSITION Select which section of the tiled image to be displayed on the monitor. 1TILE COMP Turns the TILE COMP feature on. NOENABLE Enables Tile Matrix. NOPOWER ON DELAY Adjusts the delay time between being in “standby” mode and entering “power on” mode. 0 Sec.“POWER ON DELAY” can be set between 0 and 50 seconds.POWER INDICATOR Turns ON or OFF the LED located at the front of the monitor. ONIf “OFF” is selected, LED will not light when the LCD monitor is in active mode.MULTI DISPLAY RESET Resets the following settings within the MULTI DISPLAY menu back to factory setting: -MONITOR ID, IR CONTROL, TILE MATRIX, POWER ON DELAY.POWER SAVE Sets how long the monitor waits to go into power save mode after a lost signal. ONAll inputs except for TV Note: When connecting DVI, video card might not stop sending digital data even if image hasdisappeared. In this case the monitor does not get to power management mode.STANDBY MODE Lowers power consumption. STANDBYNote: RS-232C Function is lost when in Eco Standby mode.HEAT STATUS Displays status of the COOLING FAN, BRIGHTNESS and TEMPERATURE. -FAN CONTROL Cooling fan reduces the temperature of the display. AUTOSCREEN SAVER Use the SCREEN SAVER function to reduce the risk of Image Persistence.GAMMA The display gamma is changed and fixed when “ON” is selected. OFFBRIGHTNESS The brightness is decreased when “ON” is selected. OFFMOTION The screen image is slightly expanded and moves in 4 directions (UP, DOWN, RIGHT, LEFT) OFFat user determined intervals.SIDE BORDER COLOR Adjusts the color of the side borders when a 4:3 image is displayed. 15Press + button, the bar will become lighter.Press - button, the bar will become darker.AUTO BRIGHTNESS Adjusts the brightness level according to the input signal. OFFDVI, VGA, RGB/HV inputs onlyCHANGE SECURITY Allows the security password to be changed. -PASSWORD The factory preset password is 0000.SECURITY LOCK Locks the security password. OFFDDC/CI ENABLE/DISABLE: Turns On or OFF the two way communication and control of the monitor. ENABLEDISPLAY PROTECTION Resets the following settings within the DISPLAY PROTECTION menu back to factory setting: -RESET POWER SAVE, FAN CONTROL, SCREEN SAVER, SIDE BORDER COLOR, AUTOBRIGHTNESS.*: The product you purchased may not have this feature.MULTI DISPLAYDISPLAY PROTECTION