NEC MultiSync V984Q User Manual

Also see for MultiSync V754Q: User manual Installation guide Setup guide Installation guide User manual

Contents

English-36SCHEDULESCHEDULE SETTINGS Creates a working schedule for the monitor.Press the , +, - buttons to navigate and change the schedule settings. Press the SET/ZOOM on the remoteor Input change buttons on the monitor to select settings.NOTE: Please set DAY & TIME before configuring the SCHEDULE SETTINGS.When the SCHEDULE SETTINGS window is closed, any schedules that you set are saved.If schedules are set for the same time, higher SETTINGS numbers are given the priority.If OFF TIMER is ON, SCHEDULE SETTINGS is not available.When you select an invalid input signal or picture mode, it will display in red. While the SCHEDULE SETTINGSwindow is open, schedules are not operated. Also, see page 46.SETTINGS Set ON to activate the schedule. Maximum 30 schedules are set.POWER Setting for the monitor power. Please set ON or OFF for each schedule.TIME Set the schedule operation time. If there is no specific time for the schedule set [--].INPUT Set the input signal for the schedule. To keep the input signal that is active when the schedule starts set [--].When you set INPUT, please select ON at POWER.PIC. MODE Set the picture mode for the schedule. To keep the picture mode that is active when the schedule starts set [--].When you set PIC. MODE, please select ON at POWER.Select one item from below (only one item is available).DATE Select this setting if the schedule is for one day schedule or irregular schedules.EVERY DAY Select this setting if the schedule is repeating every day.EVERY WEEK Select this setting if the schedule is repeating every week.WEEKDAY Select this setting if the schedule is on a weekday.This item is set by the WEEKEND and the HOLIDAY settings. A day, which is not selected at WEEKEND andHOLIDAY settings is set as a weekday.WEEKEND Select this setting if the schedule is on a weekend.Schedule operates on the date that is set at WEEKEND SETTINGS.HOLIDAY Schedule operates on the date that is set at HOLIDAY SETTINGS.SCHEDULE LIST List of working schedules. Displays up to 30 schedules.HOLIDAY SETTINGSNo. Creates holiday schedule for the monitor.YEARMONTHDAYWEEKSet YEAR and MONTH.Select DAY or WEEK.DAY: Set a day.WEEK: Set a week and the day of the week.If you set [--] at MONTH or YEAR, every month or year of the day you select is set as a holiday.END DAY Set the end of holiday date. If you schedule beyond a year, please separate the schedule per year.NOTE: If DAY is not set, END DAY is not available. If your holiday setting includes [--] for year or month, ENDDAY is not available.SET/DELETE Sets or deletes a schedule.WEEKEND SETTINGWEEKEND Set the day of the week.DATE & TIME Sets the date, time, and daylight savings region. Date & time must be set in order for the “SCHEDULE” functionto operate.NOTE: If the monitor’s main power has been turned off for two weeks, the DATE & TIME setting goes back to thedefault setting and the clock function stops working.YEAR Sets the year for the real-time clock.MONTH Sets the month for the real-time clock.DAY Sets the day for the real-time clock.TIME Sets the time for the real-time clock.CURRENT DATE TIME Shows the current date and time.