NEC MultiSync V984Q User Manual

Also see for MultiSync V754Q: User manual Installation guide Setup guide Installation guide User manual

Contents

English-56Name SettingsClick on “NAME” on the left column below HOME.MONITOR NAME Defines a monitor name. The name must be max. 16 characters long. The default is the model name.HOST NAME(CONTROL)Type in the hostname of the monitor which is connected to the network.Up to 15 alphanumeric characters can be used.HOST NAME (MP) Type in the hostname of the network to be used in the Media Player connected to the monitor.Up to 15 alphanumeric characters can be used.DOMAIN NAME Type in the domain name of the network which is connected with the monitor.Up to 60 alphanumeric characters can be used.Network Password SettingsClick on “NETWORK PASSWORD” on the left column below HOME.PJLink CLASS Set a class for PJLink*.NOTE: PJLink is a network interface standard that JBMIA established.http://pjlink.jbmia.or.jp/index.htmlThis monitor is available for class1 and class2 command.NOTIFY FUNCTIONENABLEEnable or disable a notification of the monitor network condition. This function is only for class2.NOTIFY ADDRESS Set an IP ADDRESS to which the monitor network status will be sent. This function is only for class2.PJLink PASSWORD Set a password for PJLink*. The password must be max. 32 characters long. Do not forget yourpassword. If you forget your password, consult your supplier.HTTP PASSWORD Set a password for the HTTP server. The password must be max. 10 characters long.HTTP PASSWORDENABLEAn HTTP PASSWORD is required when logging into the HTTP server.Set the monitor name as the USER NAME when entering the password.*What is PJLink?PJLink is a standardization of protocol used for controlling devices of different manufacturers. This standard protocol wasestablished by Japan Business Machine and Information System Industries Association (JBMIA) in 2005.The device supports all commands of PJLink.PD LIST InformationClick on “PD LIST” on the left column below HOME.Shows a list of monitor IDs and IP addresses of multiple monitors which are daisy-chained.NOTE: Only the master monitor can show the list.MEMO SettingsClick on “MEMO” on the left column below HOME.Set a title and message.TITLE The title must be max. 24 characters long.MESSAGE A message must be max. 240 characters long.MEMO PASSWORD The default is “0000”.MEMO PASSWORDENABLEA MEMO PASSWORD is required when selecting MEMO PASSWORD ENABLE.SD-CARD VIEWER settingClick “SD-CARD VIEWER” on the left side of HOME.Please refer to Using SHARED SD card SETTINGS (See page 27).External ControlConnecting external deviceThere are two ways to connect an external device to the monitor.• RS-232C terminal.Connecting an external device to the RS-232C terminal of the monitor with a RS-232C cable.• LAN port.Connecting an external device to the LAN port of the monitor with a LAN cable.For further information regarding the type of LAN cable to use, please consult your network administrator.