130REFERENCE ADJUSTMENTAstig AdjustmentThis feature allows you to adjust the beam shape.Proceed as follows:1 Press and hold the CTL button then press the ADJUST button todisplay the “REF. ADJUST” menu.• The projector may ask you to enter your passcode.• See page 68 for the explanation of the PASSCODE.2 Use the CURSOR or button to highlight the “1/ASTIG”item. Press the ENTER or INPUT “1” button to display the“ASTIG” menu.Items to select• CENTER ......... Adjusts the whole screen• EDGE ............. Adjusts the top, bottom, left, and right sides onthe screen• CORNER ........ Adjusts the four corners on the creen3 Use the CURSOR or button to select the “CENTER”,“EDGE”, or “CORNER” item. Press the ENTER button todisplay the “ASTIG” adjustment screen.• The “DOT COARSE” test pattern is automatically displayed.• Pressing The CTL and FOCUS buttons rotates three items asfollows:CENTER→EDGE→CORNER4 Select the CRT you wish to adjust with R, G, or B button.5 Press the R, G, or B button to project the only CRT beam to beadjusted.• You can turn on or off each CRT beam (R, G, or B).A S T I G- C E N T E R -C R T - G -5 0 %H5 0 %V– A S T I G –1 / C E N T E R2 / E D G E3 / C O R N E R– R E F . A D J U S T –1 / A S T I G2 / B R I G H T U N I F O R M .3 / W H I T E U N I F O R M .4 / R A S T E R C E N T E R I N G5 / F O C U S B A L .6 / R E F . W H I T E B A L
