NEC MultiSync XG85RP-CH Setup Manual

Also see for MultiSync XG-1352C: Operation manual

Contents

NEC MultiSync XG85RP-CH Setup Manual Manual pdf 88 page image

88SETTINGAuto Power ON Mode SettingThe AUTO POWER ON MODE is a convenient way to start up theprojector without pressing the POWER button. You can turn theprojector on and off by supplying AC power to the projector.To do this, proceed as follows:1 Press the ADJUST button to display the “ADJUST” menu.• The projector may ask you to enter your passcode.See page 68 for the explanation of the PASSCODE.2 Use the CURSOR or button to highlight the “8/OPTION”line. Press ENTER to display the “OPTION” menu. You can alsoselect the “OPTION” menu directly by pressing the INPUT “8”button.3 Use the CURSOR or button to highlight the “1/SETTINGMODE” line. Press ENTER to display the “SETTING MODE”menu. You can also select the “SETTING MODE” menu directlyby pressing the INPUT “1” button.4 Use the CURSOR or button to select the “AUTO POWERON MODE” item on Page 2, then press ENTER to display the“AUTO POWER ON MODE” menu.NOTE: The SETTING MODE has three menus. The “AUTOPOWER ON MODE” item is on the second menu (P02). Toaccess P02 from P01, press and hold down the CTL button thenpress the button; to return to P01 from P02, press and holddown the CTL button then press the button.– A D J U S T –1 / S I G N A L E N T R Y2 / F O C U S3 / A L I G N M E N T4 / C O N V E R G E N C E5 / K E L V I N6 / R , G , B G A I N7 / P A S S C O D E8 / O P T I O N9 / R E F . A D J U S T– O P T I O N –1 / S E T T I N G M O D E2 / M E N U M O D E3 / S E Q U E N C E R4 / P J A D D R E S S5 / V E R S I O N6 / H O U R M E T E R7 / D E F A U L T D A T AP02/P03 OPTION – SETTING MODE –WARM-UP MODEINACTIVEAUTOMATIC DATA STOREPHOSPHOR SAVER OFFSIGNAL SWITCHING SOUNDMUTE ONPICTUREMUTE ONINACTIVEDISABLEAUTO POWER ON MODE