NEC MultiSync XG85RP-CH Setup Manual

Also see for MultiSync XG-1352C: Operation manual

Contents

NEC MultiSync XG85RP-CH Setup Manual Manual pdf 75 page image

75SETTINGProjection Type SelectionThis feature allows you to set the installation type according to theprojection configuration.NOTE:• You do not need to change the setting for XG-852C and XG-1352C.These models are pre-adjusted at the factory for "FLOOR/FRONT".1 Press the ADJUST button to display the “ADJUST” menu.• The projector may ask you to enter your passcode.See page 68 for the explanation of the PASSCODE.2 Use the CURSOR or button to highlight the “8/OPTION”line. Press ENTER to display the “OPTION” menu. You can alsoselect the “OPTION” menu directly by pressing the INPUT “8”button.3 Use the CURSOR or button to highlight the “1/SETTINGMODE” line. Press ENTER to display the “SETTING MODE”menu. You can also select the “SETTING MODE” menu directlyby pressing the INPUT “1” button.4 Use the CURSOR or button to select the “PJ ORIENTA-TION” item, then press ENTER to display the “PJ ORIENTA-TION” menu.NOTE: The SETTING MODE has three menus. The “PJ ORIEN-TATION” item is on the first menu (P01). To access P02 or P03from P01, press and hold down the CTL button then pressthe button; to return to P01 from P02 or P03, press and holddown the CTL button then press the button.– A D J U S T –1 / S I G N A L E N T R Y2 / F O C U S3 / A L I G N M E N T4 / C O N V E R G E N C E5 / K E L V I N6 / R , G , B G A I N7 / P A S S C O D E8 / O P T I O N9 / R E F . A D J U S TP01/P03 OPTION – SETTING MODE –CONNECT CONDITIONCEILINGFRONTDEFAULT INPUT SELECTFOCUS EDGE MODE ALLS-VIDEO MODE SELECT S2AUTOSTANDALONELASTPJ ORIENTATIONVIDEO MODE SELECT– O P T I O N –1 / S E T T I N G M O D E2 / M E N U M O D E3 / S E Q U E N C E R4 / P J A D D R E S S5 / V E R S I O N6 / H O U R M E T E R7 / D E F A U L T D A T A