NEC MultiSync XG85RP-CH Setup Manual

Also see for MultiSync XG-1352C: Operation manual

Contents

NEC MultiSync XG85RP-CH Setup Manual Manual pdf 90 page image

90SETTINGWarm-up Mode SettingThis function allows you to automatically warm up the projectorfrom 5 to 15 minutes when the projector is turned on.To set the Warm-up mode, proceed as follows:1 Press the ADJUST button to display the “ADJUST” menu.• The projector may ask you to enter your passcode.See page 68 for the explanation of the PASSCODE.2 Use the CURSOR or button to highlight the “8/OPTION”line. Press ENTER to display the “OPTION” menu. You can alsoselect the “OPTION” menu directly by pressing the INPUT “8”button.3 Use the CURSOR or button to highlight the “1/SETTINGMODE” line. Press ENTER to display the “SETTING MODE”menu. You can also select the “SETTING MODE” menu directlyby pressing the INPUT “1” button.4 Use the CURSOR or button to select the “WARM-UPMODE” item on Page 2, then press ENTER to display the“WARM-UP MODE” menu.NOTE: The SETTING MODE has three menus. The “WARM-UPMODE” item is on the second menu (P02). To access P02 fromP01, press and hold down the CTL button then pressthe button; to return to P01 from P02, press and hold downthe CTL button then press the button.– A D J U S T –1 / S I G N A L E N T R Y2 / F O C U S3 / A L I G N M E N T4 / C O N V E R G E N C E5 / K E L V I N6 / R , G , B G A I N7 / P A S S C O D E8 / O P T I O N9 / R E F . A D J U S T– O P T I O N –1 / S E T T I N G M O D E2 / M E N U M O D E3 / S E Q U E N C E R4 / P J A D D R E S S5 / V E R S I O N6 / H O U R M E T E R7 / D E F A U L T D A T AP02/P03 OPTION – SETTING MODE –INACTIVEPHOSPHOR SAVER OFFSIGNAL SWITCHING SOUNDMUTE ONPICTUREMUTE ONINACTIVEDISABLEAUTO POWER ON MODEWARM-UP MODEAUTOMATIC DATA STORE